


Handheld Stop Go Sign Malaysia
PRODUCT OVERVIEW
The Handheld LED Stop and Go Traffic Sign Light from Blue Box Sdn Bhd is a battery-operated signal board measuring 37 x 19cm, built for people who direct traffic on foot. It carries 9 red LEDs for STOP and 7 green LEDs for GO on one board, so a marshal can show a clear instruction to approaching drivers without a fixed signal. It is supplied to road contractors, construction sites, and facility operators across Malaysia.
LEDs make a handheld sign far easier to read than a plain painted board, especially at dawn, dusk, and night or in poor weather. The manufacturer quotes a visible distance of up to 300 metres, which gives drivers time to read the instruction and slow down. Actual visibility depends on light conditions and line of sight, so the figure should be treated as a best case.
The sign offers a flash mode, a steady light mode, and an off setting, with an emergency light function for drawing extra attention to a hazard. Flashing lights attract the eye more strongly than steady ones, which helps when a vehicle is approaching a work zone, a breakdown, or an accident scene faster than expected.
Road works and temporary hazards put both workers and road users at risk. The World Health Organization identifies road traffic injuries as a major global public health concern, and clear, early warning of hazards is one of the simplest ways to lower that risk. On workplace sites, DOSH Malaysia guidance stresses controlling vehicle movement around people. A handheld sign supports both aims by letting a trained marshal give a clear, immediate instruction.
At 37 x 19cm and only 0.3 to 0.6 kg without batteries, the sign is light enough to hold for a full shift and small enough to store in a vehicle or site cabin. Batteries are not included, so buyers should plan for suitable batteries and spares for longer jobs. It is a signalling aid for trained personnel, not a barrier, and does not replace a site traffic management plan or any devices required by local road authorities.
Blue Box Sdn Bhd supplies the sign alongside its Warehouse Safety Solutions and road safety range, including road cones and expandable barriers, so teams across Petaling Jaya, Shah Alam, Klang, and Selangor can assemble a complete traffic control kit from one supplier. Visit www.blue-box.asia to view related products or request a bulk quotation.
Whether you are controlling one-lane traffic at road works, managing vehicles at a site gate, or warning drivers at a breakdown, the Handheld LED Stop and Go Traffic Sign Light gives marshals a bright, light, and easy-to-read signal.
Product Specifications Table
| Specification | Detail |
| Product Name | Handheld LED Stop and Go Traffic Sign Light (Battery Operated, Red & Green) |
| Brand | BYBIGPLUS |
| Model No. | P03-00037 |
| Type | Handheld LED stop and go signal board (one board) |
| Board Size | 37cm x 19cm |
| LED Quantity | 9 red LEDs + 7 green LEDs |
| Colour | Red and green |
| Flash Mode | Flash / steady light / off, with emergency light function |
| Visible Distance | Up to 300m (manufacturer figure) |
| Working Temperature | As supplied: “-20℃ – -55℃” (likely -20℃ to +55℃; please confirm) |
| Power | Battery operated; batteries not included (battery type not stated) |
| Item Weight | 0.3–0.6 kg per sign (without batteries) |
| Est. Packed Box Size (Courier) | Approx. 40cm (L) x 22cm (W) x 6cm (H) |
| Typical Application | Manual traffic control at road works, site entrances, car parks, and hazard areas |
| Not Intended For | Use as a barrier, or as a replacement for required traffic signals or signage |
| Country of Supply | Malaysia (Blue Box Sdn Bhd, Selangor) |
7 PRO Tips
- Tip 1: Test the sign before every shift: switch through flash, steady, and off, and check that all 9 red and 7 green LEDs light.
- Tip 2: Fit fresh batteries before long jobs and carry spares, since batteries are not included and brightness drops as they run down.
- Tip 3: Hold the sign at chest or head height, facing approaching traffic, so the lit face is clearly visible from a distance.
- Tip 4: Use flash mode for hazards and emergencies, and steady light for routine stop or go instructions, so drivers learn what to expect.
- Tip 5: Wear a high-visibility vest and stand where drivers can see you early, with an escape route clear behind you.
- Tip 6: Pair the sign with warning cones, barriers, and advance signage so drivers get warning well before they reach the marshal.
- Tip 7: Store the sign dry and clean, remove batteries for long storage, and replace any unit with cracked casing or dead LEDs.
Applications
Road Works & Construction
- Controlling one-lane traffic through road works
- Directing delivery trucks at construction site entrances
- Guiding vehicles around excavations and temporary hazards
- Managing short-term lane closures for maintenance crews
- Warning drivers at the start of a work zone
Warehouses, Factories & Car Parks
- Directing trucks at loading bay and yard entrances
- Managing vehicle and pedestrian crossings in busy yards
- Controlling entry and exit at car parks during peak times
- Marshalling vehicles during stock deliveries and collections
- Stopping traffic briefly during forklift or crane movements
Events, Emergencies & Public Areas
- Guiding vehicles at event car parks and drop-off points
- Warning drivers of a breakdown or accident scene
- Directing traffic during short utility or repair works
- Managing access at temporary closures and diversions
- Backup signalling when fixed signals are down
Features & Benefits Table
| Feature | Benefit |
| 9 red LEDs + 7 green LEDs | Gives a clear, bright STOP or GO signal that is easy to read |
| Up to 300m visible distance | Gives drivers more time to see the instruction and slow down |
| Flash, steady, and off modes with emergency light | Lets the marshal match the signal to routine control or hazard warning |
| Handheld 37 x 19cm board | Compact and easy to carry and store in a vehicle or site cabin |
| Lightweight (0.3–0.6 kg without batteries) | Comfortable to hold for a full shift |
| Battery operated | No mains power or cables needed, so it works anywhere on site |
| Part of Blue Box’s safety range | Combine with cones and barriers from one supplier |
Frequently Asked Questions (FAQ)
Q1. What is a handheld LED stop and go sign used for?
It lets a marshal show a red STOP or green GO signal to drivers at road works, site entrances, car parks, and hazard areas.
Q2. How many LEDs does it have?
It has 9 red LEDs and 7 green LEDs on one board.
Q3. How far can the sign be seen?
The manufacturer quotes a visible distance of up to 300 metres. Real visibility depends on light, weather, and line of sight.
Q4. Are batteries included?
No. Batteries are not included. The battery type has not been stated, so please confirm with our sales team before buying.
Q5. What are the light modes?
The sign has flash, steady light, and off settings, plus an emergency light function.
Q6. What size and weight is it?
The board measures 37 x 19cm and weighs about 0.3 to 0.6 kg without batteries.
Q7. Does it replace traffic signals or a traffic management plan?
No. It is a signalling aid for trained personnel and does not replace required signals, signage, or a site traffic management plan.
Q8. How do I order the handheld LED stop and go sign in Malaysia?
You can request a quotation through www.blue-box.asia or contact Blue Box Sdn Bhd’s sales team by phone or WhatsApp for fast, Malaysia-wide delivery support.
Pain Points vs. Solutions
| Pain Point | Blue Box Solution |
| Painted STOP/GO boards are hard to read at night or in rain | Red and green LEDs make the instruction clear in low light |
| Drivers do not see the marshal in time | Up to 300m visible distance and a flash mode draw attention early |
| Fixed traffic lights are costly and slow to set up for short jobs | Handheld, battery-operated sign is ready to use in seconds |
| Heavy equipment tires the marshal over a long shift | Lightweight board of 0.3–0.6 kg is comfortable to hold |
| Sourcing signs, cones, and barriers from different suppliers slows procurement | Available alongside Blue Box’s road and Warehouse Safety Solutions range |
Technical Documentation
Product Code: P03-00037
Brand: BYBIGPLUS
Board Size: 37cm x 19cm
LEDs: 9 red + 7 green
Modes: Flash / steady light / off, with emergency light function
Visible Distance: Up to 300m (manufacturer figure)
Working Temperature (as supplied): “-20℃ – -55℃” — confirm intended range
Power: Battery operated; batteries not included; battery type not stated
Item Weight: 0.3–0.6 kg per sign (without batteries)
Est. Packed Box Size (Courier): Approx. 40cm (L) x 22cm (W) x 6cm (H)
Reference Standard: General traffic control practice; refer to local road authority requirements and DOSH Malaysia (www.dosh.gov.my) for workplace traffic management guidance
Notes to confirm: (1) Working temperature was supplied as “-20℃ – -55℃”; it is probably -20℃ to +55℃. (2) Battery type and quantity have not been stated. (3) Model P03-00037 is already used for the earlier LED Stop/Go Traffic Sign (brand BPDM); confirm whether this handheld sign needs its own model number.
WooCommerce shipping fields: enter weight as 0.6 kg (upper end of range) and dimensions as 40 x 22 x 6 cm.
Order Now — Call to Action
Give your marshals a signal drivers can see. Order the Handheld LED Stop and Go Traffic Sign Light today from Blue Box Sdn Bhd — Malaysia’s trusted supplier of road safety and workplace safety equipment.
- WhatsApp: +6018 988 6818 / +6012 779 2930
- Phone: 03-8052-0108
- Email: customerservice@blue-box.asia
- Website: www.blue-box.asia
Bulk orders and Malaysia-wide delivery available. Request your quotation today.
Why Choose Blue Box
- Malaysia-based supplier with fast quotation turnaround for road and workplace safety equipment.
- Established since 2017, serving contractors, factories, and logistics sites across Selangor and Malaysia-wide.
- Bright red and green LEDs with up to 300m visibility for clear STOP and GO signals.
- Lightweight, battery-operated design that is easy to carry and use anywhere on site.
- One-stop sourcing — pair signs with road cones, barriers, and other safety products from the same supplier.
- Reliable stock availability supported by Blue Box’s dedicated warehouse operations.
- Responsive customer service via phone, email, and WhatsApp for quotations and order support.
Custom Branding & OEM
Blue Box Sdn Bhd offers custom product design and private label manufacturing support for traffic control signage, including custom branding, packaging, and bulk packing for contractors, corporate, and distributor orders.
Minimum order quantities, lead times, and specifications vary by request. Contact the Blue Box sales team to discuss OEM requirements and receive a tailored quotation.
Company Information
Company: Blue Box Sdn Bhd (Reg. No. 201701018646 / 1232811-W)
Founded: 2017
Address: 27, Jalan Industri USJ 1/11, Taman Perindustrian USJ 1, 47600 Subang Jaya, Selangor, Malaysia
Phone: 03-8052-0108 / +6018 988 6818 / +6012 779 2930
Email: customerservice@blue-box.asia
Website: www.blue-box.asia
Specialisation: Packaging materials, cargo securing systems, workplace safety equipment, road safety products, and custom/private label manufacturing
Disclaimer (Product-Specific)
The Handheld LED Stop and Go Traffic Sign Light is a visual signalling aid for trained personnel directing traffic or pedestrians. It is not an approved replacement for a site traffic management plan, temporary traffic signals, or any signage or devices required by local road authorities, and it is not a barrier. The quoted 300m visible distance is a manufacturer figure that depends on ambient light, weather, and line of sight, and real-world visibility may be lower. Batteries are not included, and battery type, battery life, and ingress protection (waterproofing) have not been stated for this product. Check that the unit works and that all LEDs light before each shift, and do not rely on it as the only warning on high-speed roads. The working temperature range was supplied as “-20℃ – -55℃”; please confirm the intended range before relying on it. Blue Box Sdn Bhd recommends following local road authority requirements for traffic control on public roads and consulting DOSH Malaysia guidelines for workplace traffic management. Weight and packing dimensions are approximate; specifications are subject to change without prior notice, so please confirm current specifications with our sales team before order confirmation.










