Rivet Nut Gun Malaysia
PRODUCT OVERVIEW
The 86pcs Hand Rivet Nut Gun Kit from Blue Box Sdn Bhd is a complete starter set for fitting threaded inserts into thin sheet metal and similar panels. It combines a hand rivet gun with 80 aluminium flat head rivet nuts in five thread sizes (M3, M4, M5, M6, and M8) and the matching mandrels and nosepieces, so you can start fitting threaded fixings as soon as it arrives. It is supplied to workshops, maintenance teams, and repair businesses across Malaysia.
A rivet nut, also called a blind rivet nut or threaded insert, gives thin material a strong internal thread without welding or tapping. You drill a hole, thread the nut onto the mandrel, push it into the hole, and squeeze the gun handles. The tool pulls the nut so its body expands and grips the back of the panel, leaving a fixed thread that a bolt or screw can use. Because it works from one side only, it suits panels where you cannot reach the back.
This kit covers the most common small thread sizes. The nuts are made from aluminium alloy, which is light and resists rust, and they have a flat head that sits against the panel surface to spread the clamping load. The mix is 20 each of M3, M4, and M5, and 10 each of M6 and M8, which suits typical small-part and repair work where the smaller sizes are used most.
Kit contents are 80 rivet nuts, 5 mandrel and nosepiece sets, and 1 gun, which makes 86 pieces. The gun measures about 9.7 x 27cm (3.82 x 10.63 inches), and the kit weighs roughly 0.5 to 0.8 kg, so it is easy to carry to a job. As with any hand tool, wear eye protection and follow safe working practice; guidance on hand tool safety is available from DOSH Malaysia.
It is important to understand what the kit is for. It is a manual tool for fitting rivet nuts, not a nail gun. The rivet nuts are intended for general fixing and repair work, not for structural or safety-critical joints, and no load rating is stated. Details such as the gun material, the panel thickness range, and whether a case is included have not been given, so please confirm them with our sales team if they matter for your use.
Blue Box Sdn Bhd supplies the kit alongside its tools and site supplies, including Packaging Tools and fasteners such as coach screws and nylon plugs, so customers across Petaling Jaya, Shah Alam, Klang, and Selangor can source tools and fixings from one supplier. Visit www.blue-box.asia to view related products or request a bulk quotation.
Whether you are repairing a panel, fitting a bracket to a sheet metal frame, or adding threaded points to an enclosure, the 86pcs Hand Rivet Nut Gun Kit gives you the tool and the nuts in one set.
Product Specifications Table
| Specification | Detail |
| Product Name | Hand Rivet Nut Gun Kit, 86pcs (M3–M8 Aluminium Flat Head Rivet Nuts) |
| Brand | BYBIGPLUS |
| Model No. | BPDIM-00497 |
| Kit Type | Hand rivet nut gun kit (blind rivet nut / threaded insert tool) |
| Rivet Nut Type | Flat head rivet nut |
| Thread Sizes | M3, M4, M5, M6, M8 |
| Rivet Nut Material | Aluminium alloy |
| Colour | Black + silver + blue |
| Rivet Gun Size | About 9.7 x 27cm (3.82 x 10.63 inches) — supplied text was unclear; please confirm |
| Total Pieces | 86 |
| Rivet Nuts Included | 20 x M3, 20 x M4, 20 x M5, 10 x M6, 10 x M8 (80 total) |
| Accessories | 5 x mandrel and nosepiece sets (M3, M4, M5, M6, M8), 1 x rivet gun |
| Item Weight | 0.5–0.8 kg per kit |
| Est. Packed Box Size (Courier) | Approx. 32cm (L) x 14cm (W) x 7cm (H) — estimated, based on a 27cm-long gun plus accessories and packing allowance |
| Typical Application | Fitting threaded fixings in sheet metal and thin panels for repair, maintenance, and workshop jobs |
| Not Intended For | Nail or staple driving; structural, lifting, or safety-critical joints |
| Country of Supply | Malaysia (Blue Box Sdn Bhd, Selangor) |
Kit Contents (86 Pieces)
| Item | Quantity |
| M3 rivet nuts | 20 |
| M4 rivet nuts | 20 |
| M5 rivet nuts | 20 |
| M6 rivet nuts | 10 |
| M8 rivet nuts | 10 |
| Mandrels and nosepieces (M3, M4, M5, M6, M8) | 5 sets (one per size, assumed) |
| Rivet gun | 1 |
| Total pieces | 86 (80 rivet nuts + 5 mandrel/nosepiece sets + 1 gun) |
7 PRO Tips
- Tip 1: Choose the mandrel and nosepiece that match the rivet nut size (M3, M4, M5, M6, or M8) before you start; a wrong pairing will not set the nut properly.
- Tip 2: Drill the hole to the size recommended for each rivet nut and drill straight, because an oversized or crooked hole weakens the grip.
- Tip 3: Deburr both sides of the hole so the flat head sits flush against the panel.
- Tip 4: Thread the nut fully onto the mandrel, push it into the hole, and squeeze the handles firmly until the nut is set, rather than stopping part way.
- Tip 5: Test the finished thread with a bolt of the right size to confirm the nut is set straight and has not spun in the hole.
- Tip 6: Wear eye protection when drilling and setting nuts, and keep fingers clear of the nosepiece.
- Tip 7: Store the mandrels, nosepieces, and unused nuts sorted by size so you can pick the right one quickly next time.
Applications
Workshops & Light Fabrication
- Adding threaded points to sheet metal brackets and enclosures
- Fitting nuts to thin panels where welding or tapping is not practical
- Making jigs, covers, and mounting plates
- Attaching accessories to metal frames and cabinets
- Prototype and small-batch assembly work
Maintenance, Warehouse & Facility Repair
- Repairing stripped threads in thin metal panels
- Fitting labels, guards, or brackets to racking and equipment panels
- Adding fixing points to signage frames and covers
- Reinstating mounting points on machinery housings
- General repair jobs that need a fresh thread in thin sheet
Household & DIY Repair
- Fitting fixings in metal furniture and appliance panels
- Repairing metal gates, frames, and fittings
- Adding bolt-on points to sheet metal projects
- Small automotive and equipment panel repairs, within the tool’s limits
- General household repair and hobby projects
Features & Benefits Table
| Feature | Benefit |
| 86-piece complete kit | Gun, nuts, mandrels, and nosepieces in one set, ready to use |
| Five thread sizes (M3 to M8) | Covers the common small thread sizes for repair and workshop work |
| 80 aluminium flat head rivet nuts | Light, rust-resistant nuts with a head that sits flush against the panel |
| Matching mandrels and nosepieces | The right fitting for each nut size, so you do not need to buy them separately |
| One-side installation | Works on panels where you cannot reach the back |
| Hand operated | No power, air, or electricity needed, so you can use it anywhere |
| Compact, about 0.5–0.8 kg | Easy to carry to site or keep in a toolbox |
Frequently Asked Questions (FAQ)
Q1. What is a rivet nut gun used for?
It fits rivet nuts, also called threaded inserts, into drilled holes in sheet metal and thin panels, giving a strong internal thread for a bolt or screw.
Q2. What is included in the 86pcs kit?
The kit has 20 x M3, 20 x M4, 20 x M5, 10 x M6, and 10 x M8 rivet nuts (80 in total), 5 mandrel and nosepiece sets for M3 to M8, and 1 rivet gun.
Q3. What material are the rivet nuts made from?
The rivet nuts are made from aluminium alloy and have a flat head.
Q4. Is this a nail gun?
No. It is a manual tool for setting rivet nuts and cannot drive nails or staples.
Q5. Do I need to drill a hole first?
Yes. You drill a hole to the size recommended for the rivet nut, then set the nut into it with the gun.
Q6. Can I use it for structural or safety-critical joints?
No. The kit is for general fixing and repair work. No load rating is stated, so it should not be used for structural, lifting, or safety-critical joints.
Q7. What is the weight and size of the kit?
The kit weighs about 0.5 to 0.8 kg. The gun measures about 9.7 x 27cm (3.82 x 10.63 inches).
Q8. How do I order the rivet nut gun kit in Malaysia?
You can request a quotation through www.blue-box.asia or contact Blue Box Sdn Bhd’s sales team by phone or WhatsApp for fast, Malaysia-wide delivery support.
Pain Points vs. Solutions
| Pain Point | Blue Box Solution |
| Thin sheet metal cannot hold a tapped thread | Rivet nuts give thin panels a strong internal thread without welding or tapping |
| Cannot reach the back of a panel to fit a normal nut | Blind rivet nuts are fitted from one side only |
| Buying tool, nuts, and fittings separately is slow and error-prone | 86-piece kit includes the gun, 80 nuts, and matched mandrels and nosepieces |
| Only one thread size on hand for varied jobs | Five thread sizes (M3 to M8) in one set |
| Sourcing tools and fixings from different suppliers slows procurement | Available alongside Blue Box’s tools and fasteners range |
Technical Documentation
Product Code: BPDIM-00497
Brand: BYBIGPLUS
Kit Type: Hand rivet nut gun kit
Rivet Nut Type: Flat head
Thread Sizes: M3, M4, M5, M6, M8
Rivet Nut Material: Aluminium alloy
Colour: Black + silver + blue
Gun Size: About 9.7 x 27cm (3.82 x 10.63 inches)
Kit Contents: 80 rivet nuts (20 M3, 20 M4, 20 M5, 10 M6, 10 M8), 5 mandrel and nosepiece sets, 1 rivet gun = 86 pieces
Item Weight: 0.5–0.8 kg per kit
Est. Packed Box Size (Courier): Approx. 32cm (L) x 14cm (W) x 7cm (H) — estimated, based on a 27cm-long gun plus accessories and packing allowance
Reference Standard: General hand tool practice; refer to DOSH Malaysia (www.dosh.gov.my) for hand tool safety guidance
Notes to confirm: (1) The gun size was supplied as “9.727cm/3.8210.63in”, which was read as 9.7 x 27cm (3.82 x 10.63 inches). (2) “5 x Mandrels and Nosepieces (M3, M4, M5, M6, M8)” was read as one set per size. (3) Gun material, panel thickness range, and whether a case is included were not given. (4) The packed box size is an estimate. (5) The supplied title also said “Nail Gun”; this was left out because the tool sets rivet nuts and does not drive nails.
WooCommerce shipping fields: enter weight as 0.8 kg (upper end of range) and dimensions as 32 x 14 x 7 cm.
Order Now — Call to Action
Get strong threads into thin sheet. Order the 86pcs Hand Rivet Nut Gun Kit today from Blue Box Sdn Bhd — Malaysia’s trusted supplier of packaging, cargo securing, and workplace supplies.
- WhatsApp: +6018 988 6818 / +6012 779 2930
- Phone: 03-8052-0108
- Email: customerservice@blue-box.asia
- Website: www.blue-box.asia
Bulk orders and Malaysia-wide delivery available. Request your quotation today.
Why Choose Blue Box
- Malaysia-based supplier with fast quotation turnaround for tools and site supplies.
- Established since 2017, serving workshops, maintenance teams, and distributors across Selangor and Malaysia-wide.
- Complete 86-piece kit with the gun, five thread sizes, and matched accessories.
- Aluminium flat head rivet nuts for light, rust-resistant threaded fixings.
- One-stop sourcing — pair the kit with fasteners and other site supplies from the same supplier.
- Reliable stock availability supported by Blue Box’s dedicated warehouse operations.
- Responsive customer service via phone, email, and WhatsApp for quotations and order support.
Custom Branding & OEM
Blue Box Sdn Bhd offers custom product design and private label manufacturing support for hand tool kits, including custom packaging and labelling, alternative nut size assortments, and bulk packing for corporate and distributor orders.
Minimum order quantities, lead times, and specifications vary by request. Contact the Blue Box sales team to discuss OEM requirements and receive a tailored quotation.
Company Information
Company: Blue Box Sdn Bhd (Reg. No. 201701018646 / 1232811-W)
Founded: 2017
Address: 27, Jalan Industri USJ 1/11, Taman Perindustrian USJ 1, 47600 Subang Jaya, Selangor, Malaysia
Phone: 03-8052-0108 / +6018 988 6818 / +6012 779 2930
Email: customerservice@blue-box.asia
Website: www.blue-box.asia
Specialisation: Packaging materials, cargo securing systems, workplace safety equipment, road safety products, and custom/private label manufacturing
Disclaimer (Product-Specific)
The Hand Rivet Nut Gun Kit is a manual tool for fitting aluminium rivet nuts (threaded inserts) into pre-drilled holes in sheet metal and similar thin panels. It is not a nail gun or a stapler, and it is not designed for structural, load-bearing, lifting, or safety-critical joints. Holding strength depends on the panel material and thickness, the hole size, and correct installation, and no load rating has been stated for the rivet nuts or the joint. The gun material, the thickness range it can handle, and whether a carry case is included have not been stated for this product. Wear eye protection when drilling and riveting, deburr drilled holes, and keep fingers clear of the nosepiece and moving parts. Rivet nuts are single-use. Use only the matching mandrel and nosepiece for each size. Blue Box Sdn Bhd recommends consulting DOSH Malaysia guidelines on safe use of hand tools. Weight and packing dimensions are approximate; specifications are subject to change without prior notice, so please confirm current specifications with our sales team before order confirmation.
