


Large Wheel Chock Malaysia
PRODUCT OVERVIEW
The Large Rubber Wheel Chock from Blue Box Sdn Bhd is a heavy duty wheel stopper made from recycled rubber. At 320 x 300 x 260mm and about 12 kg, it is sized to sit firmly against a truck, trailer, or trolley wheel and stop it rolling on a yard, loading ramp, or workshop floor.
Wheel chocks are a simple, low-cost safeguard against unintended rolling, which is a common cause of injury and vehicle damage when a load is being loaded, unloaded, or parked. The chock works best as a supplement to the parking brake and correct gear selection, not as a replacement for them.
The recycled rubber body gives the chock weight and grip on a firm floor, and its 12 kg mass resists being pushed out of position by a wheel. The large size suits trucks and heavier trolleys. Guidance on vehicle movement and workplace safety is available from DOSH Malaysia.
The load rating, rubber grade, and tyre size range have not been stated for this product, so please confirm them with our sales team before purchase. Chocks should be placed on firm, level ground, and they can slip on steep slopes or oily surfaces.
Blue Box Sdn Bhd supplies the chock as part of its Warehouse Safety Solutions range, so fleets, logistics yards, and workshops across Petaling Jaya, Shah Alam, Klang, and Selangor can source safety equipment from one supplier. Visit www.blue-box.asia to view the full range or request a quotation.
Whether you are parking a truck at a Klang depot or stopping a loaded trolley on a Shah Alam loading ramp, the Large Rubber Wheel Chock gives you a heavy, dependable wheel stop.
Product Specifications Table
| Specification | Detail |
| Product Name | Rubber Wheel Stopper Choke / Heavy Duty Wheel Chock (Large, 320 x 300 x 260mm) |
| Brand | BlueBox (as supplied) |
| Model No. | B01-00012 |
| Size | Large: 320 mm x 300 mm x 260 mm |
| Material | Recycled rubber |
| Weight | 12 kg per piece (large) |
| Load Rating | Not stated — please confirm |
| Tyre Size Range | 20″ above |
| Est. Packed Box Size (Courier/Lorry) | Approx. 35 cm (L) x 32 cm (W) x 27 cm (H) — estimated for one chock, packed |
| Typical Application | Stopping trucks, trailers, and trolleys from rolling in yards and loading areas |
| Not Intended For | Replacing the parking brake, or as a load restraint |
| Country of Supply | Malaysia (Blue Box Sdn Bhd, Selangor) |
7 PRO Tips
- Tip 1: Place a chock on both sides of the wheel that needs holding, against the tyre, not the rim.
- Tip 2: Set the parking brake and select the correct gear before placing chocks, and turn off the engine.
- Tip 3: Use chocks on firm, level ground; avoid steep slopes, oily, or wet floors where chocks can slip.
- Tip 4: Keep hands and feet clear of the wheel and the chock when placing or removing it.
- Tip 5: Remove chocks before the vehicle moves, and check they are clear of the wheel.
- Tip 6: Inspect the rubber for cracks, chunks missing, or flattening, and replace worn chocks.
- Tip 7: Store chocks together in a dry area, so they are ready for each vehicle.
Applications
Logistics & Fleet Yards
- Stopping trucks and trailers during loading and unloading
- Holding parked trailers in yards
- Securing vehicles at loading bays
- Stopping trolleys on loading ramps
- General yard vehicle restraint
Warehouses & Factories
- Stopping trolleys and carts on sloped docks
- Securing delivery vehicles at goods-in
- Holding trailers during dock work
- Restraining heavy equipment on floors
- General workplace wheel restraint
Workshops & Service Bays
- Stopping vehicles during maintenance
- Holding trailers and equipment during repair
- Securing vehicles in service bays
- Restraining wheeled equipment in workshops
- General workshop safety
Features & Benefits Table
| Feature | Benefit |
| Recycled rubber construction | Heavy, grippy body that resists sliding on firm ground |
| Large size (320 x 300 x 260mm) | Suits trucks, trailers, and heavier trolleys |
| 12 kg weight | Stays in position against the wheel |
| Simple wedge placement | Quick to place and remove with no tools |
| Part of Blue Box’s Warehouse Safety range | Source chocks with other safety equipment from one supplier |
Frequently Asked Questions (FAQ)
Q1. What is a wheel chock used for?
It stops a vehicle, trailer, or trolley from rolling. It is used alongside the parking brake and correct gear selection.
Q2. What size is the large chock?
It measures 320 x 300 x 260mm.
Q3. What is it made from?
It is made from recycled rubber.
Q4. How much does one chock weigh?
Each large chock weighs about 12 kg.
Q5. Can I use it instead of the parking brake?
No. It supplements the parking brake and gear selection, and should not replace them.
Q6. Which tyres does it fit?
The tyre size range has not been stated. Please confirm with our sales team before purchase.
Q7. Can it be used on slopes?
It can slip on steep slopes or oily floors. Do not rely on chocks alone on gradients.
Q8. How do I order wheel chocks in Malaysia?
You can request a quotation through www.blue-box.asia or contact Blue Box Sdn Bhd’s sales team by phone or WhatsApp for fast, Malaysia-wide delivery support.
Pain Points vs. Solutions
| Pain Point | Blue Box Solution |
| Vehicles or trolleys roll during loading | Heavy wheel chock holds the wheel in position |
| Light chocks slide out of place | 12 kg recycled rubber body resists movement |
| Metal chocks damage floors or are hard to handle | Rubber chock is easy to place and does not mark most surfaces |
| Sourcing safety equipment from different suppliers slows procurement | Available alongside Blue Box’s Warehouse Safety Solutions range |
Technical Documentation
Product Code: B01-00012
Brand: BlueBox (as supplied; confirm)
Size: 320 x 300 x 260 mm (large)
Material: Recycled rubber
Weight: 12 kg per piece
Load Rating / Tyre Range: Not stated
Est. Packed Box Size (Courier/Lorry): Approx. 35 cm (L) x 32 cm (W) x 27 cm (H) — estimated for one chock, packed
Reference Standard: General vehicle movement and workplace safety practice; refer to DOSH Malaysia (www.dosh.gov.my)
Order Now — Call to Action
Keep your vehicles and trolleys where they belong. Order the Large Rubber Wheel Chock today from Blue Box Sdn Bhd — Malaysia’s trusted supplier of workplace safety equipment.
- WhatsApp: +6018 988 6818 / +6012 779 2930
- Phone: 03-8052-0108
- Email: customerservice@blue-box.asia
- Website: www.blue-box.asia
Bulk orders and Malaysia-wide lorry or freight delivery available. Request your quotation today.
Why Choose Blue Box
- Malaysia-based supplier with fast quotation turnaround for workplace safety equipment.
- Established since 2017, serving fleets, logistics yards, and workshops across Selangor and Malaysia-wide.
- Large heavy-duty chock in recycled rubber.
- 12 kg weight for a stable hold on the wheel.
- One-stop sourcing — pair chocks with barriers, cones, and other safety products.
- Reliable stock availability supported by Blue Box’s dedicated warehouse operations.
- Responsive customer service via phone, email, and WhatsApp for quotations and freight arrangements.
Custom Branding & OEM
Blue Box Sdn Bhd offers custom product design and private label manufacturing support for safety equipment, including custom colours, printed branding, and bulk packing for fleet and corporate orders, subject to the base product’s specifications.
Minimum order quantities, lead times, and specifications vary by request. Contact the Blue Box sales team to discuss OEM requirements and receive a tailored quotation.
Company Information
Company: Blue Box Sdn Bhd (Reg. No. 201701018646 / 1232811-W)
Founded: 2017
Address: 27, Jalan Industri USJ 1/11, Taman Perindustrian USJ 1, 47600 Subang Jaya, Selangor, Malaysia
Phone: 03-8052-0108 / +6018 988 6818 / +6012 779 2930
Email: customerservice@blue-box.asia
Website: www.blue-box.asia
Specialisation: Packaging materials, cargo securing systems, workplace safety equipment, road safety products, and custom/private label manufacturing
Disclaimer (Product-Specific)
The Large Rubber Wheel Chock is a wheel restraint for stopping vehicles, trailers, and trolleys from rolling. It is a supplementary device: it does not replace the parking brake, gear selection, or engine-off procedures, and it is not a load restraint. It should be placed against the tyre on both sides of the wheel that needs holding, on a firm, level surface, and removed before the vehicle moves. Chocks can slip on steep slopes, wet or oily surfaces, and loose ground, so do not rely on them alone on gradients. The load rating, the rubber grade, and whether the chock suits your tyre size have not been stated for this product and should be confirmed with our sales team before purchase. The material is described as recycled rubber. Keep hands and feet clear of the wheel when placing or removing a chock. Blue Box Sdn Bhd recommends consulting DOSH Malaysia guidelines on vehicle movement and workplace safety. Weights and packing dimensions are approximate; specifications are subject to change without prior notice, so please confirm current specifications with our sales team before order confirmation.












