Ratchet Tie Down Belt Malaysia
PRODUCT OVERVIEW
The 38mm x 10m Ratchet Tie Down Belt from Blue Box Sdn Bhd is a cargo securing strap with a 3-ton loading weight, a 38mm (1.49-inch) webbing width, and a 10-metre length. It is used with a ratchet to tension the belt tightly around a load and hold it in place on a truck, lorry, or trailer.
The 38mm width is a common size for general cargo, giving a broad bearing surface that spreads the load across the webbing. The 10-metre length allows the belt to pass over the top of a load and round the vehicle’s anchor points, with enough length to tie down medium and larger loads. The ratchet lets the operator tighten the belt by hand, without tools, to remove slack.
The product is rated for a 3-ton loading weight. This is the working load limit the belt is designed to carry, which is different from its breaking strength. The breaking strength, ratchet rating, and webbing material have not been stated for this product and should be confirmed in writing before use.
Unsecured cargo is a known road safety risk. The World Health Organization identifies road traffic injuries as a major global concern, and loads that shift or fall from vehicles can contribute to crashes. Load securing is part of responsible transport. The International Maritime Organization cargo-securing guidance covers the same principles for sea and road freight, and DOSH Malaysia provides guidance on workplace load handling.
Blue Box Sdn Bhd supplies this belt as part of its Cargo Securing Solutions range, alongside cargo nets, corner protectors, and lashing products, so fleet operators and logistics teams across Petaling Jaya, Shah Alam, Klang, and Selangor can source a complete load-securing kit from one supplier. Visit www.blue-box.asia to view related products or request a bulk quotation.
Whether you are securing a pallet on a lorry in Shah Alam or tying down machinery on a trailer in Klang, the 38mm x 10m Ratchet Tie Down Belt gives you a 3 ton load-securing strap in a practical length.
Product Specifications Table
| Specification | Detail |
| Product Name | Ratchet Tie Down Belt, 38mm (1.49″) x 10 m, 3 Ton Loading Weight |
| Brand | BBIM |
| Model No. | B01-00167 |
| Type | Ratchet tie down belt (load securing strap) |
| Webbing Width | 38mm (1.49 inches) |
| Belt Length | 10 metres |
| Loading Weight | 3 Ton |
| Breaking Strength | Not stated — please confirm |
| Webbing Material | Not stated — please confirm |
| Ratchet / Hook Type | Not stated — please confirm |
| Item Weight | 0.5–1 kg per belt (use 1 kg for courier) |
| Est. Packed Box Size (Courier) | Approx. 30 cm (L) x 25 cm (W) x 12 cm (H) — estimated for one 10 m belt with ratchet, packed |
| Typical Application | Securing cargo on trucks, lorries, and trailers |
| Not Intended For | Lifting loads; use without rated anchor points |
| Country of Supply | Malaysia (Blue Box Sdn Bhd, Selangor) |
7 PRO Tips
- Tip 1: Use anchor points rated for the load, and keep the load within the stated 3 ton loading weight.
- Tip 2: Route the belt over the top of the load and tension it with the ratchet until the load does not move.
- Tip 3: Use edge protectors where the belt crosses sharp corners, to stop the webbing being cut or weakened.
- Tip 4: Never stand in line with the belt while tensioning or releasing it, as a failing strap can recoil.
- Tip 5: Check the webbing, stitching, hook, and ratchet before every use, and remove any damaged belt from service.
- Tip 6: Do not knot, twist, or join belts, and do not use them to lift loads.
- Tip 7: Store the belt dry and out of direct sunlight, since UV exposure weakens webbing over time.
Applications
Road Transport & Logistics
- Securing palletised cargo on lorries and trailers
- Tying down machinery and equipment for transport
- Securing loads on flatbed trucks
- Load securing for fleet and delivery operations
- General cargo restraint on road journeys
Construction & Industrial
- Securing building materials on site vehicles
- Tying down plant and equipment on trailers
- Securing scaffolding and timber loads
- Restraining materials during site moves
- General cargo securing on industrial vehicles
Warehouse & Yard Operations
- Securing loads during yard transfers
- Restraining palletised stock on yard vehicles
- Tying down stored goods for moving
- Securing dock-loaded cargo before dispatch
- General load restraint in logistics yards
Features & Benefits Table
| Feature | Benefit |
| 38mm webbing width | Broad bearing surface for general cargo |
| 10-metre length | Passes over larger loads and round anchor points |
| 3 ton loading weight | Rated for medium and heavy loads (to be confirmed in writing) |
| Ratchet tensioning | Tighten by hand without tools |
| Part of Blue Box’s Cargo Securing range | Source straps, nets, and protectors from one supplier |
Frequently Asked Questions (FAQ)
Q1. What is a 38mm ratchet tie down belt used for?
It secures cargo on trucks, lorries, and trailers by tightening over the load with a ratchet.
Q2. What is the loading weight?
The belt has a 3 ton loading weight. Please confirm the breaking strength in writing, since the two are different.
Q3. How long is the belt?
It is 10 metres long.
Q4. How wide is the webbing?
The webbing is 38mm (1.49 inches) wide.
Q5. Can I use it to lift loads?
No. It is for securing cargo, not lifting.
Q6. Does it need edge protection?
Use edge protectors where the belt crosses sharp corners, to protect the webbing.
Q7. How much does one belt weigh?
Each belt weighs about 0.5 to 1 kg.
Q8. How do I order the ratchet tie down belt in Malaysia?
You can request a quotation through www.blue-box.asia or contact Blue Box Sdn Bhd’s sales team by phone or WhatsApp for fast, Malaysia-wide delivery support.
Pain Points vs. Solutions
| Pain Point | Blue Box Solution |
| Loads shift or fall off in transit | Ratchet belt tensioned tightly over the load |
| Strap length too short for larger loads | 10-metre length passes over bigger loads and anchor points |
| Webbing too narrow for heavier cargo | 38mm webbing spreads the load |
| Sourcing straps and protectors from different suppliers slows procurement | Available alongside Blue Box’s Cargo Securing Solutions range |
Technical Documentation
Product Code: B01-00167
Brand: BBIM
Webbing Width: 38mm
Length: 10 m
Loading Weight: 3 Ton
Breaking Strength / Material / Ratchet Rating: Not stated
Item Weight: 0.5–1 kg per belt (use 1 kg for courier)
Est. Packed Box Size (Courier): Approx. 30 cm (L) x 25 cm (W) x 12 cm (H) — estimated for one 10 m belt with ratchet, packed
Reference Standard: General load securing practice; refer to DOSH Malaysia (www.dosh.gov.my) and applicable road transport rules
Order Now — Call to Action
Secure your loads properly. Order the 38mm x 10m Ratchet Tie Down Belt today from Blue Box Sdn Bhd — Malaysia’s trusted supplier of cargo securing equipment.
- WhatsApp: +6018 988 6818 / +6012 779 2930
- Phone: 03-8052-0108
- Email: customerservice@blue-box.asia
- Website: www.blue-box.asia
Bulk orders and Malaysia-wide delivery available. Request your quotation today.
Why Choose Blue Box
- Malaysia-based supplier with fast quotation turnaround for cargo securing equipment.
- Established since 2017, serving logistics operators, fleets, and freight companies across Selangor and Malaysia-wide.
- 38mm, 10-metre ratchet belt with a 3 ton loading weight.
- Easy hand tensioning with the ratchet.
- One-stop sourcing — pair belts with cargo nets, corner protectors, and lashing products.
- Reliable stock availability supported by Blue Box’s dedicated warehouse operations.
- Responsive customer service via phone, email, and WhatsApp for quotations and order support.
Custom Branding & OEM
Blue Box Sdn Bhd offers custom product design and private label manufacturing support for cargo securing products, including custom lengths, webbing colours, and branded packaging for fleet and corporate orders, subject to the rated specifications of the base product.
Minimum order quantities, lead times, and specifications vary by request. Contact the Blue Box sales team to discuss OEM requirements and receive a tailored quotation.
Company Information
Company: Blue Box Sdn Bhd (Reg. No. 201701018646 / 1232811-W)
Founded: 2017
Address: 27, Jalan Industri USJ 1/11, Taman Perindustrian USJ 1, 47600 Subang Jaya, Selangor, Malaysia
Phone: 03-8052-0108 / +6018 988 6818 / +6012 779 2930
Email: customerservice@blue-box.asia
Website: www.blue-box.asia
Specialisation: Packaging materials, cargo securing systems, workplace safety equipment, road safety products, and custom/private label manufacturing
Disclaimer (Product-Specific)
The 38mm x 10m Ratchet Tie Down Belt has a stated loading weight of 3 ton. Loading weight (working load limit) is not the same as breaking strength, and the breaking strength, the ratchet rating, and the webbing material have not been stated for this product and should be confirmed with our sales team before use. Only use the belt with the anchor points rated for the load, and keep the load within the stated loading weight. Check the webbing, stitching, hook, and ratchet for cuts, fraying, UV damage, or distortion before each use, and remove the belt from service if damaged or after it has been loaded beyond its rating. Do not use the belt to lift loads, and never stand in the line of the belt when tensioning it, as a failing strap can recoil violently. Use edge protectors where the belt crosses sharp corners. Follow the requirements for securing loads in road transport that apply to your vehicle and cargo. Blue Box Sdn Bhd recommends consulting DOSH Malaysia guidelines on load securing. Weights and packing dimensions are approximate; specifications are subject to change without prior notice, so please confirm current specifications with our sales team before order confirmation.
